BITTEL KULLANIM KLAVUZU – USERS GUIDE Sayfa
17
-
24
UNPACKING YOUR PHONE
This package should contain the following:
•
HA 9888(38) base unit
•
Faceplates
•
Handset
•
Coiled handset cord
•
Straight line cord
•
This manual
INSTALLATION
The HA 9888(38) Series is designed for hotel applications and behind a
registered PBX system in hotel. Determine you have the correct modular jack for
connecting the telephone. If you do not have a modular jack, one may be
obtained at minimal cost at a local hardware store, discount store or home center.
1) Located on the left side of the HA 9888(38) phone is a modular jack. Insert one
end of the coiled handset cord into this jack (you will hear the coil cord click when
properly inserted.)
2) Insert the other end of the coiled handset cord into the modular jack on the
handset.
3) Turn the telephone so the back panel is facing you. Insert either end of the line
cord into the jack on the back of the telephone labeled “
TO TEL”
.
4) Insert the other end of the line cord into a telephone wall jack.
5) Once your telephone is connected, place the paper faceplate over the keys.
The plastic overlay slips into place by hooking the tabs on the overlay into the
recessed slots located on both sides. The overlay is easiest to insert when the left
or right side tabs are inserted first, and the middle of the overlay is slightly bowed
to allow for insertion of the other tabs.
CONTROLS,CONNECTIONS AND FUNCTION KEYS