Bitron Video B-Twin AV1001/40, Инструкция по эксплуатации, Страница: 10 / 21

18 DS901001-005 DS901001-005 19
This menu will be displayed over the image coming from the door unit
Select (Loudspeaker volume), (Brightness), (Contrast), (Colour) using directional buttons
Up/Down ( / ).
Select the desired value using directional buttons Right/Left ( / )
Press (OK) to confi rm; press (X) to cancel or press MENU to quit the setting menu.
2.7 FLOOR CALL
The video door phone is equipped with a pair of terminal pins (CP) for the connection of a fl oor call button.
When a fl oor call is received, the video door phone emits a ring, according to the ring tone selected by the
user; the display does not turn on.
2.8 AUTO-ON
The auto-on function allows to see on the display the image captured by system call modules. When the system
is in standby mode, press the button
and wait until the image is displayed on the video door phone (the
fi rst displayed image is the one coming from the main call module number 0); press again the button
to go to the next call modules. The fi rst images displayed are those coming from the main call modules, then
secondary of the belonging column. To close the auto-on function, press twice the audio button
.
The auto-on function can not be performed if the column is already in conversation. If the auto-on function is
activated when the column is already in conversation, the video door phone will emit an alert tone.
2.9 CALLING THE SWITCHBOARD
This function allows to establish a communication with the concierge switchboard: press the button to
send the call to the switchboard. If there is no answer within 10 s, the video door phone turns off and the call
will be stored in the switchboard.
The call to the switchboard is only AUDIO.
2.10 INTERCOM CALL
Intercom call using the directory
The device allows to perform up to 32 intercom calls.
There are two types of intercom calls: intercom call inside the same apartment and intercom call outside the
apartment (the called device must be in the same column). To perform a call from the directory:
Press the button MENU to access the menu.
Select the icon
and press OK.
Select the user to be called with directional buttons and press OK.
When the call is sent, the monitor turns off.
If the system is busy, the user can not access the menu.
Intercom call using quick selection keys
The fi rst 4 users of the video door phone directory can be called using quick selection keys (buttons
•
•
•
•
•
•
•
); the fi rst 4 users are associated to directional buttons as follows:
User 1 -
User 2 -
User 3 -
User 4 -
To perform an intercom call using quick selection keys, press the audio button followed by a directional
button. Press again the audio button to close the conversation.
If the system is busy, the video door phone emits an alert tone.
The intercom call is only AUDIO.
3 MENU
To access the video door phone main menu, press the button
MENU
. The display shows:
The device can return to standby mode at any moment by keeping the button X pressed for at least 3
seconds.
If the column is already in conversation, the device will not turn on and emit an alert tone.
The icon of domotic system settings menu will be displayed only if the domotic interface AV1001/70
is installed.
3.1 CALL MENU
With this menu the user can call a name previously saved in the directory.
Press the button MENU to access the menu.
Select the icon and press OK.
Select the user to be called with directional buttons and press OK.
When the call is sent, the monitor turns off.
1
2
3
4
Utente 1
Utente 2
< >
•
•
•
•