BITMAIN Antminer T9, Руководство по установке

Страница: 12 / 15

-­‐ 12 -­‐
T9
S erver
Installation Guide
5. Monitoring Your
S erver
5. Monitoring Your
S erver
To check the operating status of your
server
:
1.
Click
the status marked below
.
2. M
onitor your
server
according to the descriptions in the following
Option Description
ASIC# Number of chips detected in the chain.
Frequency ASIC frequency setting.
GH/S(RT) Hash rate of each hash board ( GH/s)
Temp(PCB) Temperature of each hash board (°C).(Applied only to
server
with fixed frequency)
Temp(Chip) Temperature of the chips on each hash board (°C).
ASIC status One of the following statuses will appear:
●
O -­‐ indicates OK
●
X -­‐ indicates error
●
-­‐ -­‐ indicates dead
Note:The T9
server
with automatic frequency adjustment firmware will stop running when
the Temp(Chips) reach to 125m 135°C,there will be a error message “Fatal Error: Temperature
is too high!” shown in the bottom of kernel log page.