3. OPERATING INSTRUCTIONS
3.1
LOADING FASTENERS
Refer also to the technical data.
3.1.1 SIDE LOADING MAGAZINE
Open the magazine cover, load the fasteners, and close
the magazine.
3.1.2 REAR LOADING MAGAZINE
For 2 step type, slide the fasteners into the magazine and pull
the pusher until it is behind the fasteners. Then release the
pusher and ensure its proper engagement on the fasteners.
For 3 step type, pull the pusher to the back and keep it on the
latch mechanism. Load the fasteners and release the pusher.
3.1.3 TOP LOADING MAGAZINE
Pull the pusher to the back of the magazine and keep it on
the latch mechanism. Load the fasteners, then release the
pusher and guide it to the fasteners. Never allow the pusher
to snap back towards the fasteners as it will damage the
pusher spring.
3.1.4 BOTTOM LOADING MAGAZINE
Push the release, catch and then slide back the magazine.
Load the fasteners into the magazine cover. Then slide the
magazine back closed.
Warning: Point away the nozzle when loading or unloading the
fasteners. Always disconnect the air supply before loading fasteners.
4