www.BISSELL.com
7
Troubleshooting
Maintenance & Care
Suction
Gate
2.
Machine care (check regularly)
Cleaning suction gate
1.
Remove dirty tank.
2.
Remove two screws and pull off
suction gate door.
3.
Wipe suction gate clean and rinse
suction gate door.
4.
Replace suction gate door and
two screws.
WARNING
To reduce the risk of fire, electric shock, or injury, turn
power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting.
Reduced Spray or No Spray
Possible causes
Remedies
1. Formula & water tank may be empty
1. Refill tank
2. Formula & water tank may not be seated completely
2. Turn power OFF; Remove and reseat tank
3. Pump may have lost prime
3. Hold end of hose below water level in tank to prime
Loss of Suction Power
Possible causes
Remedies
1. Tanks may not be seated properly
1. Pick up both tanks and reseat them so it they fit
2. Dirty tank has picked up maximum amount of
snuggly on the unit
dirty water and has reached full line
2. Empty dirty tank
3. Formula & water tank is empty
3. Check fluid levels in formula & water tank
4. Suction Gate is open
4. Check to make sure the suction gate is closed;
Follow “Cleaning Suction Gate” instructions on
top of this page.
Other maintenance or service not included in the
manual should be performed by an authorized
service representative.
Thank you for selecting a BISSELL product.
Please do not return this
product to the store.
Содержание SPOTCLEAN PRO 1558 SERIES
Страница 1: ...SPOTCLEAN PRO 1558 SERIES...
