Bissell SPOTCLEAN PRO 1558 SERIES, Руководство пользователя

Страница: 6 / 8

www.BISSELL.com
6
2.
3.
4. 5.
WARNING
Keep spray away from face. Failure to do so may
result in personal injury.
IMPORTANT
Check the manufacturer’s tag before
cleaning upholstery. “W” or “WS” on the
tag means you can use your SpotClean
Pro. If tag is coded with an “S” (with di-
agonal strike-through), or says “Dry Clean
Only,” do not proceed. If manufacturer’s
tag is missing or not coded, check with
your furniture dealer.
Operations
Cleaning with your spot cleaner
1.
Plug unit in and turn on by pressing power
button.
2. Hold cleaning tool approximately 2.5cm
above soiled surface. Press spray trigger to
apply cleaning solution to soiled area.
3. Using brush on cleaning tool, gently scrub
area to be cleaned.
4.
For thorough cleaning, spray additional
solution while brush and suction are in
contact with surface.
5.
Apply downward pressure on cleaning
tool and pull it toward you. The suction
will remove the dirt and cleaning solution.
Continue until no more dirt can be removed.
6.
As a final step, use “drying strokes” (by not
pressing the spray trigger) to remove as
much liquid/moisture as possible. Repeat this
step as often as necessary.
Empty dirty tank
1.
When the dirty tank reaches the
“FULL”
line on
the tank it is time to empty.
2. Remove dirty tank and carry to a utility sink,
toilet or outside (where you will
dispose of the dirty water).
3. To unlock the dirty tank lid, rotate handle over the
back of the tank. Remove lid and pour out dirty
water. Rinse out dirty tank
to remove any debris.
4.
Replace top of tank, and rotate the handle
forward to lock in place on front of tank.
5. Before replacing tank on machine, wipe debris
from red filter.
Cleaning machine
1.
Remove and rinse the tools in clean,
running water. Dry and replace in the tool
storage provided.
2. It is recommended that you suction clean
water from a bowl to rinse out the hose. Then
lift end of hose and stretch out to ensure all
water is cleared from hose.
3. Coil flex hose around the hose wrap and
secure with latch.
4. Check suction gate and if it appears dirty,
follow steps 1-4 under Cleaning Suction Gate
on page 7.
For best results
empty, rinse and dry
both tanks before
storing.
Tip