D
Care & Storage
Machine care
1.
Unplug power cable from electrical socket.
2.
Empty and rinse dirty water tank after
each use, OR when dirty water reaches
indicated maximum fill line.
a.
Lift tank up and away from base
of machine.
b.
Pull tab to remove plug from tank.
c.
Rinse out tank with clean water
after emptying.
d.
Disconnect cleaning tool from hose
grip by pushing down on button lock
and pulling straight off. (Do NOT twist
cleaning tool to remove it).
e.
The front nozzle of the Tough Stain
Tool can be removed for easy cleaning.
Push button at top of cleaning tool and
slide front nozzle off top of cleaning tool.
Rinse both with clean water and replace
front nozzle back on cleaning tool.
f.
Check spray nozzle for accumulated
dirt or debris. If necessary, clean with
soft bristle brush.
g.
The float stack can be removed from
inside dirty water tank for cleaning.
Turn locking assembly anti-clockwise
to unlock position and pull down and
out of tank to remove. Rinse with
clean water until all debris is removed.
Replace float stack back inside dirty
water tank and turn locking assembly
clockwise to lock position.
Machine storage
Water and cleaning formula can be left in
clean water tank for next use.
1.
Wrap power cable around cable wrap
on back of machine.
2.
Wrap hose around the base of unit and
secure the hose grip.
3.
Store unit in protected, dry area, at room
temperature (4° to 43°C).
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical socket
before performing maintenance or care.
To reduce the risk of electric shock, always install
float stack before any wet pick-up operation.
6
EN
www.BISSELL.com
