9
www.BISSELL.com
Using the Automatic Cleaning Cycles
1
Quick Clean
This cycle has been
designed for stains that are on the
surface of your carpeting. This cycle will
run for approximately 3 minutes.
Hose/Tool
By selecting this option you
can clean spots and stains using the hose
and tool on surfaces such as upholstery,
stairs, car interiors, or any other hard-to-
reach area.
Done
This light will illuminate and you will
hear a series of “beeps” when the cleaning
cycle is complete. Press the STOP button
to turn the machine OFF. The machine will
not beep when turned off.
Deep Clean
Use on stains that have had
time to set-in. These are typically the
most difficult stain types to remove. This
cycle runs for approximately 6 minutes.
Stop
By pressing the red stop button,
you will stop the cleaning cycle
completely. To begin cleaning again,
you will need to start over and select a
cleaning cycle.
4
2
3
5
Tips Before Using Your SpotBot®
• Dry vacuum the area first, before spot cleaning with the SpotBot.
• Some spots and spills require that you pick up the chunky debris with a rag or towel
before you begin cleaning in the automatic or manual cycles.
WARNING
Keep spray away from face. Failure to do so may
result in personal injury.
