Bissell QuickSteamer 2080 SERIES, Руководство пользователя

Страница: 8 / 12

Maintenance & Care
www.bissell.com
800.237.7691
8
machine storage
For best results, a few simple steps can assure
your machine is well maintained after your clean-
ing is complete.
1.
Flush your machine of any remaining residual
solution
a. Fill the water tank with clean hot tap water.
b.
Recline the handle and press the spray
trigger for 15 seconds while making forward
and backward passes on carpet. Release the
trigger to suction. Repeat for another 15 sec-
onds. Continue without pressing the trigger
until there is no more water being suctioned.
2. Push the power button to turn the machine off.
Unplug the machine and wrap the power cord.
3. empty the water tank. Rinse out the water
tank with hot tap water.
4. empty the dirty water collection tank.
Rinse the tank with hot tap water.
5. Wipe all surfaces with a soft cloth. store
cleaner upright in a protected dry area.
to install the replacement brush belt
1.
Turn the machine off and unplug from
wall outlet.
2.
Remove solution and collection tanks.
3.
lay machine down to access the bottom
of the machine.
4.
With a Phillips head screwdriver,
unscrew
the brush cover and remove.
5. Remove the brush end cap and remove belt
from brush.
6. brush can now be removed.
7.
belt can be removed by sliding off the
motor pulley.
8. Clean or replace belt. Attach belt to motor
pulley and brush, insert brush into right side
end cap.
9. Reattach the left end cap and slide brush
back into place.
10. Replace the brush cover and screw
into place.
WaRnInG
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
caUtIon
Do not store unit where freezing may occur.
Damage to internal components may result.
4.
5.
6.
7.
8.
9.
brush Cover