Bissell QuickSteamer 2080 SERIES, Руководство пользователя

Страница: 7 / 12

3. a. Clean nozzle window by lifting latch and
removing it from machine. Rinse under
running water.
a.
When finished, replace nozzle and secure
with latch.
notE: for best results, it is recommended that
the nozzle is cleaned after each use.
4.
Replace collection tank on lower body and
secure with latches.
Hard floor cleaning
(included on select models only)
1. Remove the collection tank (refer to steps
2a and b in the “To empty the collection tank”
section on page 6)
2.
Attach the hard floor tool by hooking it into
the front of the removable nozzle and swinging
it down until the tabs pop into place.
3. Replace the collection tank. be sure to attach
the two latches.
4. Fill solution tank with bissell 2X Hard Floor
solutions™ to FORMUlA fill line. Fill the rest of
the tank with hot (140°F/60°C MAX) tap water
to the WATeR fill line. Replace and tighten the
black cap. *Do not boil or microwave water as it
can destroy the bladder.
5.
Follow steps 1-8 in “Carpet Cleaning” section
on page 6.
Operations
www.bissell.com
800.237.7691
7
WaRnInG
To reduce the risk of fire and electric shock- when
cleaning a hard floor, the BISSELL hard floor tool
203-5639 (models 2080 & 2090) must be used and
it must only be used with BISSELL 2X Hard Floor
Solutions formula cleaning fluid intended for use
with this appliance.
4.
3a.
2080/2090 series
2.
3b.