background image

 7

SmartMix Continued

Replace SmartMix Bottle. 

Note: If SmartMix Bottle leaks, check for 

proper positioning of o-ring and straw.

Choose the SmartMix setting that fits the cleaning job.

Water Rinse / Carpet Protector

- use for gentle 

cleaning or for the final rinse after cleaning. This 
setting must also be used when applying the 
carpet protector through the applicator, to prevent 
the pump from temporarily losing its prime.

Normal

- automatically provides the best mix of 

water and concentrate for most cleaning jobs.

High Traffic

- automatically mixes the right amount 

of water and cleaning solution to dissolve tough 
grime and heavy soil. Note: Residual cleaning 
materials left in carpet from other products may 
cause excessive foaming when picked up. If foam is 
overflowing Tank, move SmartMix Dial to “

Water 

Only

” position until the condition stops.

Note: Both the SmartMix Bottle and the clean 

water tank must have liquid in them in 
order for the machine to spray. If one is 
empty, the machine will temporarily lose 
its prime and will not spray cleaning 
solution or water. 

The powered brush roll at the floor nozzle is designed to 
enhance cleaning performance. The bristle pattern lifts out 
the deep down dirt while gently grooming carpet fibres. The 
floating suspension self-adjusts to all carpet heights. When 
the machine handle is in the fully upright position, Carpet 
Saver

 automatically raises the brush off the carpet and 

protects your carpet if you leave the Power Switch ON.

4.

5.

O-ring
Position

Tip:

Deep cleaning 

stairs and high 
traffic areas on a 
regular basis and 
using the carpet 
protector can 
prolong carpet 
life.

DirtLifter

 PowerBrush

 WARNING: 

To reduce the risk of 
fire, use only BISSELL 
Advanced Deep Cleaning 
Formula for full size 
machines in your ProHeat 
Pro-Tech. Use of cleaning 
formulas which contain 
lemon or pine oil may 
damage this appliance 
and void the warranty. 
Chemical spot cleaners 
or solvent based soil 
removers should not be 
used. These products 
may react with the plastic 
materials used in your 
ProHeat Pro-Tech, causing 
cracking or pitting.

SmartMix 
Dial

HIGH 

TRAFFIC

W

ATER RINSE/

CARPET

PROTECTOR 

NORMAL 

ug310-5815_7920E_604.indd   7

ug310-5815_7920E_604.indd   7

3/29/06   3:39:44 PM

3/29/06   3:39:44 PM

Содержание ProHeat Pro-Tech 7920 SERIES

























Отзывы: