background image

Keep openings free of dust, lint, hair, etc.

Use only commercially available floor cleaners

and waxes intended for machine application

Keep appliance on a level surface

Turn off all controls before unplugging

Unplug by grasping the plug, not the cord

Unplug before attaching the TurboBrush

Be extra careful when cleaning stairs

Pay close attention when working around children

SAVE THESE INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY.
Commercial use of this unit voids the manufacturer’s
warranty.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least 
resistance for electrical current, reducing the risk of 
electrical shock. The cord for this appliance has an
equipment-grounding conductor and a grounding
plug. It must only be plugged into an outlet that is
properly installed and grounded in accordance with
all local codes and ordinances.

WARNING:

Improper connection

of the equipment-grounding conductor can
result in a risk of electrical shock. Check
with a qualified electrician or service person
if you aren’t sure if the outlet is properly
grounded. DO NOT MODIFY THE PLUG. 
If it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
This appliance is designed for use on a
nominal 120-volt circuit, and has a
grounding attachment plug that looks like
the plug in the drawing above. Make certain
that the appliance is connected to an 
outlet having the same configuration as
the plug. No plug adapter should be used
with this appliance.

WARNING:

When using an electrical

appliance, basic precautions should be
observed, including the following:

Read

all instructions before using your POWERSTEAMER

®

PROHEAT

PLUS. To reduce the risk of fire, electric

shock, or injury, use indoors only. Do not immerse.
Use only on surfaces moistened by cleaning
process. Always connect to a properly grounded
outlet. Unplug from outlet when not in use and
before conducting maintenance or troubleshooting. 

Do not leave machine when it is plugged in

Do not service machine when it is plugged in

Do not use with damaged cord or plug

Do not use machine if it has been dropped, 

damaged, left outdoors or dropped into water

Do not expose to rain, store indoors 

Do not handle unit with wet hands

Do not pull or carry by cord, use cord as a 

handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces

Do not carry the appliance while in use

Do not unplug by pulling on cord-unplug by

grasping plug

Do not handle plug or appliance with wet hands

Do not put any object into appliance openings,

use with blocked opening, or restrict air flow

Do not expose hair, loose clothing, fingers or

body parts to openings or moving parts

Do not pick up hot or burning objects

Do not pick up flammable or combustible 
materials (lighter fluid, gasoline, kerosene, etc.) 

or use in the presence of explosive liquids or vapour

Do not use appliance in an enclosed space filled

with vapours given off by oil base paint, paint 
thinner, some moth proofing substances, 
flammable dust, or other explosive or toxic vapours

Do not pick up toxic material (chlorine bleach, 

ammonia, drain cleaner, gasoline, etc.)

Do not modify the 3-prong grounded plug

Do not allow to be used as a toy

Do not use for any purpose other than described

in this User’s Guide

Use only manufacturer’s recommended 

attachments

Use only cleaning products formulated by 

BISSELL for use in this appliance

2

IMPORTANT SAFETY INSTRUCTIONS

Grounded

Outlets

Grounding Pin

Содержание PROHEAT PLUS 1698 POWERSTEAMER


















Отзывы: