12
w w w . b i s s e l l . c o m
O
peration
Hard floor cleaning (continued)
4.
Attach microfibre pad to quick dry hard floor tool by
attaching to the Velcro strips on the top of the tool.
5.
Attach the quick dry hard floor tool to end of
the wand.
6.
Place tool directly on the hard floor surface,
resting on the pad.
7.
Squeeze the spray trigger to moisten the pad
with cleaning solution.
Caution: Do not oversaturate.
8.
Move the tool back and forth across the floor
to clean. Squeeze spray trigger as needed.
9.
Tilt the tool forward and pull back. This will
create the best suction and will help get the
hard floor surface as dry as possible.
10.
Continue until room is complete.
11.
See “When You Are Finished” instructions on
page 11.
12.
Be sure to remove the microfibre pad and
clean it by hand or machine wash as needed.
Allow it to dry completely before next use.
Upholstery cleaning
Your PROheat All-Rounder comes with special
tools for vacuuming and wet cleaning upholstery,
stairs and more.
1.
Important!
If using to wet clean upholstery,
check the upholstery tags proceeding.
a.
Check manufacturer’s tag before
cleaning. “W” or “WS” on the tag means
you can use your PROheat All-Rounder.
If the tag is coded with an “X” or an “S”
(with a diagonal stripe through it), or
says “Dry Clean Only”, do not proceed
with deep cleaning. Do not use on velvet
or silk. If manufacturer’s tag is missing
or not coded, check with the furniture
maker or the furniture dealer.
b.
Check for colourfastness in an
inconspicuous place.
c.
If possible, check upholstery stuffing.
Coloured stuffing may bleed through
fabric when wet.
d.
Plan activities to allow upholstery time
to dry.
e.
Vacuum thoroughly.
2
Adsdfdd ghg bvh
cvbbj jkn hnbj jkvh
gcghhjj jhf
fhl kllgh
Manufacturer’s tag
