O
perations
Empty dirty tank
1.
When the dirty tank reaches the
“FULL”
line on the tank it is time to empty.
2.
Remove dirty tank and carry to a utility
sink, toilet or outside (where you will
dispose of the dirty water).
3.
to unlock the dirty tank lid, rotate handle
over the back of the tank. Remove lid and
pour out dirty water. Rinse out dirty tank
to remove any debris.
4.
Replace top of tank, and rotate the handle
forward to lock in place on front of tank.
5.
before replacing tank on machine, wipe
debris from red filter
Cleaning machine
1.
Remove and rinse the tools in clean,
running water. dry and replace in the
tool storage provided.
2.
it is recommended that you suction
clean water from a bowl to rinse out the
hose. then lift end of hose and stretch
out to ensure all water is cleared from
hose.
3.
coil flex hose around the hose wrap
and secure with latch.
4.
check suction gate and if it appears
dirty, follow steps 1-4 under cleaning
suction gate on page 8.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
7
2.
3.
4.
5.
Tip:
for best results empty,
rinse and dry both tanks
before storing.
WARNING:
to reduce the risk of fire, electric
shock, or injury, turn power
off and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
