w w w. b i s s e l l c o m m e r c i a l . c o m 8 0 0 . 2 4 2 . 1 3 7 8
9
M
aintenance and care
To maintain maximum performance from
your BISSELL Pro PowerForce, perform
these simple maintenance checks.
Replace dust bag
Never reuse a dust bag. Use only the
following replacement bags with this unit.
■
U1451PK10
■
U1451PK25
1.
Unplug cleaner from electrical outlet.
2.
Pull the bag door outward to open.
Set bag door aside.
3.
Grasp dust bag collar, and pull collar from
connector tube. Discard used dust bag.
4.
Grasp new dust bag collar and push
firmly onto connector tube. Tuck in
dust bag.
5.
Replace bag door by placing tab on
bottom of door into opening as shown.
Press top of door to snap securely shut.
NOTE: Vacuum will not suction
while the bag door is removed.
WARNING:
Do not operate cleaner with
damp or wet filters or without
bag and all filters in place.
WARNING:
To reduce the risk of injury from
moving parts, turn off vacuum
cleaner and disconnect Power
Plug from electrical outlet.
4.
5.
WARNING:
To reduce the risk of electric
shock, turn power switch
OFF and disconnect plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
