www.BISSELL.com
5
Assembly
The only tool you will need to assemble
your vacuum is a Phillips screwdriver.
Slide handle down over
body of vacuum.
Take the opposite
end of the hose and
open the foot base
door. Insert hose
end into foot and
push into place.
Once inserted
into the foot, hose
should be stretched
into the side and
upper hose clips.
Install extension
wand and crevice
tool in back of the
unit as shown.
Insert two screws and
fasten using screwdriver.
Insert hose with elbow
end facing down and
align, locking tab with
slot. Rotate clockwise
until snapped into place.
5
NOTE:
The Dusting Brush does not store on-board (see Tools section for usage).
1
2
3
4
