w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9
M
aintenance and care
4.
Separate the outer foam filter and inner
pleated circular filter. Wash each
individually by hand in warm water.
Mild detergent may be used if desired.
Rinse well; let filters completely air dry
before replacing in filter cup.
5.
Wash filter cup in warm water with mild
detergent. Completely air dry before
reassembling with filters.
do not put in dishWasheR.
6.
The upper tank and louvers can be
wiped clean with a damp cloth. Reach
underneath the upper tank and turn the
rim of the louvers to the left to unlock. Pull
straight down and remove. Make sure all
parts are completely dry before replacing.
7.
To replace louvers, position top of louvers
inside clear center cavity and turn toward
the right to lock tabs into place.
cleaning the pre-motor filter
The pre-motor filter protects the motor
from debris.
1.
Turn power OFF. Unplug vacuum cord
from electrical outlet.
2.
The pre-motor filter is located
underneath the filter cup in the round
center portion of the Lock ‘n Seal lever.
3.
Remove the small round filter and any
debris on top of it. Rinse under warm
water; air dry completely before replacing.
Replacing the post-motor filter
The post-motor filter assists in the filtration
process to return clean air to the room.
1.
Turn power OFF. Unplug vacuum cord
from electrical outlet.
2.
Locate filter behind door at the front of
the vacuum. Remove and replace when
filter becomes dirty. The white, pleated
filter is NOT washable.
cleaning the inner & outer circular filter continued
6.
4.
Pre-Motor
Filter
Open
Door
Post-Motor
Filter
Remove
Filter
