www.BISSELL.com
6
PowerBrush Switch
Adjusting the Variable Suction
Press the Brush Roll switch to run the
PowerBrush for carpet cleaning (brush roll
is on when light on switch is illuminated).
Turn vacuum on by pressing Power
Switch on (I - ON and O - OFF).
Locate the Variable
Suction Control
Valve on the Hose
Wand Base.
To decrease the
amount of suction
for cleaning delicate
carpets, curtains,
or rugs; twist the
variable suction valve
counterclockwise.
NOTE:
The vacuum will come with the Variable Suction Valve closed for full
suction power.
suction control
Twist Valve - Marker
moves to indicate
suction level
FULL
REDUCED
Full
Suction
Reduced
Suction
suction control
Twist Valve - Marker
moves to indicate
suction level
FULL
REDUCED
Full
Suction
Reduced
Suction
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
1
2
NOTE:
Turn the Brush Roll OFF when vacuuming hard or delicate surfaces that
may be caught by the rotating brush. This could include hard wood, tiled floors,
small area rugs or frieze carpets that have long delicate fibers or threads.
NOTE:
The brush roll will automatically shut off when vacuum is locked in upright
position, recline to reactivate.
Brush Roll
On/Off Switch
Power
On/Off
Switch
1
2
