www.BISSELL.com
8
WARNING
To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
Maintenance:
Cleaning the Dirt Container & Filters
Maintenance:
Emptying the Dirt Container
1
2
Press Empty
Button
Pull handle
to push Dirt
Container away
from vacuum
Holding Dirt Container over a trash bin,
press Release Button on back.
Snap bottom back into place
Press
Release
Button
Pull
Press to Release
2
Press Empty
Button
and pull
away from
vacuum.
Twist top
right to
separate.
Twist
Press
PO
WERGLIDE
Rinse and dry all sections
of dirt container with
paper towel.
PO
WERGLIDE
Place dry pre-motor filters back
on top of dirt container with
black tabbed side on top. Place
post-motor filter back to bottom
front of vacuum and snap filter
cover door back on.
5
6
Remove pre-motor filters
and check for dirt on BOTH
sides. Separator Screen can
be rinsed and dried as well.
With dirt container removed,
press red release button to
access post-motor filter.
Clean all filters with mild
detergent, rinse, and squeeze all
excess water. Allow filters to dry
completely before reinserting.
Pre-Motor
Filters
Checked pattern
when filter bottom
is dirty
Post-Motor
Filter
1
Pre-Motor
Filters
Checked pattern
when filter bottom
is dirty
Separator
Screen
4
3
When reassem-
bling, place top
tank piece last
and twist left.
