Bissell POWERFRESH 19405 Series, Руководство пользователя

Страница: 7 / 24

7
www.BISSELL.com
Getting Ready
The mop pad may have already come attached
to the mop head, if not follow step 1 below.
1. Attach mop pad by setting mop head in
mop pad, making sure quick-grip release tab
is located on back.
2. Fill the water tank
a. Remove tank by lifting straight up
and away from machine.
b. Unscrew cap at bottom of water tank.
c. Fill water tank with water. For best results,
water should be at room temperature.
d. Replace the cap, tighten until snug.
e. Replace water tank by gently sliding tank
into place and press down firmly.
3. Twist the Quick Release™ Cord Wrap clock-
wise to unwrap the power cord completely and
plug into a 120-Volt outlet as described on the
Important Safety Instructions, page 2.
4. SmartSet Steam Select Indicator light will
glow when PowerFresh Steam Mop is ready to
use. Press the Steam Level button to choose the
level of steam you desire.
NOTE: Upon first use of your PowerFresh® Steam
Mop or first use after refilling the water tank,
the pump may make a “knocking” sound. This is
normal and should only last a few seconds.
Before You Clean
Thoroughly sweep or vacuum floor prior to
cleaning with PowerFresh Steam Mop.
WARNING
Never put descaling, alcoholic or detergent products
into the steam cleaner, as this may damage it or make
it unsafe for use.
2a. 2b.
Operations
TIP:
Use of distilled or demineralized
water is recommended to prolong
the life of your steam cleaner.
To add a fresh scent as you clean,
try BISSELL® demineralized waters
in various scents like Citrus,
Eucalyptus Mint and Spring Breeze.