Getting ready
The mop pad may have already come attached
to the mop head, if not follow steps 1a and 1b
below.
1.
Add Fragrance Disc and attach mop pad
a.
Insert Spring Breeze Fragrance Disc into
pocket inside mop pad. Use the whole disc
for a refreshing scent or cut in half for a
lighter scent.
b.
Set mop head in mop pad, making sure
quick-grip release tab is located on the back.
2.
Fill the water tank
a.
Remove tank by lifting straight up
and away from unit.
b.
Unscrew cap at bottom of water tank.
c.
Fill water tank with water. For best results,
water should be at room temperature.
d.
Replace the cap, tighten until snug.
e.
Replace water tank by gently sliding tank
into place and press down firmly.
3.
Twist the Quick Release™ cord wrap clock-
wise to unwrap the power cord completely and
plug into a 120-Volt outlet as described on the
Important Safety Instructions, page 3.
4.
SmartSet™ Steam Select Indicator light will
glow when PowerFresh Steam Mop is ready to
use. Press the Steam Level button to choose the
level of steam you desire.
NOTE: Upon first use of the PowerFresh® Steam
Mop or first use after refilling the water tank,
the pump may make a “knocking” sound. This
is normal and should only last a few seconds.
Before you clean
Thoroughly sweep or vacuum floor prior to
cleaning with the PowerFresh® Steam Mop.
Cleaning hard floors
Your PowerFresh® Steam Mop is designed to
clean hard flooring such as ceramic tile, vinyl,
laminate, marble, stone and sealed hard wood
floors. Use of your PowerFresh Steam Mop on
waxed or some unwaxed floors may result in a
diminished glossiness. The PowerFresh Steam
Mop is not for use on unsealed wood floors. For
best results test in an inconspicuous area and
check the care instructions from your flooring
manufacturer.
1.
Plug the unit in and wait 30 seconds for it to
heat up. Choose the level of steam to clean your
floor: Low (delicate floors), Medium (regular
cleaning), High (durable floors or sticky messes).
Begin cleaning by slowly passing the unit over
the floor surface.
Special Features
Removable water tank
The water tank is located on the top of the
PowerFresh® Steam Mop. It can be refilled
with water any time during use. Distilled or
demineralized water is recommended in place
of tap water.
Do not use chemicals in the water tank
of your PowerFresh Steam Mop.
SmartSet™ Steam Control
(Low, Medium, High) SmartSet™ Steam
Control indicator light will stop blinking when
PowerFresh® Steam Mop is ready to use. Then
press the Steam Level button to choose the level
of steam you desire.
Microfiber Mop Pads
Reusable microfiber mop pads are machine
washable and safe for virtually all hard floor
surfaces. Your PowerFresh may have come
with two different pads. The white microfiber
pad is best for everyday use on delicate
flooring like sealed hardwoods and laminate.
The gray and white striped pad can be used
for scrubbing heavily soiled floors and cleaning
tougher messes.
Removable Easy Scrubber
Quickly clean sticky messes by pressing the
Easy Scrubber with your foot and locking it
into position. Clean grout and crevices easily
with this effective tool.
Operations
www.BISSELL.ca
www.BISSELL.ca
7
6
WARNING
Do not attempt to use your PowerFresh Steam
Mop without water in the tank. You may hear
a knocking sound indicating there is no water.
Operations
» Use of distilled or demineralized water is recommended
to prolong the life of your hard floor cleaner.
Tip
WARNING
Never put descaling, alcoholic, or detergent products
into the steam cleaner, as this may damage it or make
it unsafe for use.
1a.
1b.
2a.
2b.
WARNING
Never put descaling, alcoholic, or detergent products
into the steam cleaner, as this may damage it or make
it unsafe for use.
WARNING
Tinted plates on foot may get hot while steam mop is
in use. Do not touch while hot.
Содержание PowerFresh 19401
Страница 1: ...POWERFRESH USER GUIDE 1940 SERIES ...
