6
global.BISSELL.com
Cleaning Carpets and Area Rugs
Visit
global.BISSELL.com
for helpful how-to carpet cleaning videos.
Tips Before Cleaning
• Use a dry vacuum cleaner over area before using your deep cleaner.
• To prevent damage to Berber carpets, avoid repeated strokes in the same area.
• Before cleaning area rugs, check the manufacturer’s tag and test an inconspicuous spot on the
rug for colorfastness. Don’t use on silk or delicate rugs.
• It is common to refill the clean water tank and empty the dirty water tank multiple times during
cleaning. Room size and cleaning speed both affect how often the tank may need to be refilled
and/or emptied.
1.
Plug into a properly
grounded outlet.
2.
Select cleaning mode based
on the below chart.
3.
Press the power button to
turn the machine ON.
4.
Press the recline pedal with
your foot.
Hold the spray trigger for 10
seconds to prime the system
with cleaning solution.
5.
Make forward and backward
passes based on your selected
cleaning mode. See “Cleaning
Modes & Instructions” below.
6.
When finished, turn
machine OFF.
Note:
When solution is flowing, bubbles will form at the edges of the nozzle. Holding the trigger
continuously may result in overwetting your carpet.
Cleaning Modes & Instructions
Deep Clean Mode
Delivers a deep clean to
your carpet.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release the Spray Trigger
• 1 pass forward
• 1 pass back
Deep Clean Mode with
BISSELL® Deep Clean +
ANTIBACTERIAL Formula
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
• 1 pass forward
2. Release the Spray Trigger
• 1 pass back
Express Clean Mode
Provides a lighter clean that dries in
about 45 minutes.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release the Spray Trigger
• 1 pass forward
• 1 pass back
