www.BISSELL.com
10
Problem
Possible causes
Remedies
Vacuum
won’t pick
up dirt
Filter is dirty.
Remove and rinse Filter. Allow
enough time to dry properly before
reinserting.
Main Hose is not connected.
Reconnect the main Hose by
pushing the hose connection to
secure latch.
Crack or hole in the main Hose.
If there is a crack or hole, order a
new hose from www.BISSELL.com.
Clog in the Floor Tool.
Remove debris and any other
entanglements that may be
restricting its rotation.
Clog in the Filter.
Remove the Dirt Container Filter
assembly and tap it over a rubbish
bin to remove any dirt or debris
from the cyclone screen that
surrounds the filter.
Clog in the vacuum.
Check to see if there are any clogs
in the Suction Inlet.
Filter is not seated correctly.
Ensure the Filter black portion of the
filter is completely on the lip of the
metal drum.
Dirt is
escaping
from the
vacuum
Dirt Container is full.
Empty the Dirt Container.
Filter is missing.
Check to see if Filter is in place.
Filter is not seated properly.
Ensure the Filter basket is sitting
completely on the wall of the Dirt
Container all the way around.
Troubleshooting
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting checks.
Please do not return this product to the store.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
