5
www.BISSELL.com.au
1
Secure with screws.
Slide Upper Body
onto Lower Body.
Slide Handle post into the
body by aligning the pin
and sliding the post down
into place.
2
3
4
5
Assembly
The only tool you will need to assemble
your cleaner is a Phillips-head screwdriver.
WARNING
Do not plug in your carpet cleaner until you are familiar with all instructions
and operating procedures.
Place Clean Water
Tank on back of unit.
The tank will make
a “click” noise when
seated properly.
Be sure to secure Upper
Handle before lifting. Rotate
lock collar to secure.
Wrap Power Cable.
6
Tips Before Carpet Cleaning
• If cleaning an entire room, consider moving your furniture to another area.
• Remove loose dirt and impediments before cleaning.
• Pre-treat stains with BISSELL® Pretreat to improve performance on stains
and ground-in dirt.
