Bissell POWERBRUSH PLUS 53W1F, Руководство пользователя

Страница: 5 / 16

www.BISSELL.com
5
Your deep cleaner assembles quickly and
easily. The only tool you will need for assembly
is a Phillips head screwdriver.
1. Locate the screw pack, which is taped
to the upper handle.
2. Slide the upper body onto the lower body,
taking care not to leave a gap between the
upper and lower body.
3. Firmly holding the upper body, screw
the 2 screws into the holes marked
with arrows.
4.
Slide the hose wrap onto the upper
handle as pictured and push up until
it snaps into place.
5. Slide the upper handle into the upper body
until it will not go any farther and secure it with
a screw at the marked screw hole above the
water tank.
6.
After tightening the screws, ensure proper fit
between the upper and lower body by trying to
separate the two. If assembled properly, there
should be no gap. If a gap appears between the
two (see picture at right), continue to tighten the
screws until no gap is present.
7. Place solution tank on back of unit.
8.
Wrap power cord and flex hose.
9. Keep flex hose snugly in place by using the
hose secure latch.
10. Attach tool to end of hose.
Assembly is now complete.
Assembly
22oz.
Stain
Pretreat
#1147E
WARNING
Do not plug in your deep cleaner until you have completely
assembled it per the instructions and are familiar with all
instructions and operating procedures.
2.
4.
6.
7.
9.
3.
5.
8.
10.
CORRECT INCORRECT
» If you are having
difficulty tightening
the screws, remove,
re-insert, and
tighten again.
Tip