w w w. b i s s e l l . c o m
9
M
aintenance and care
disposal of batteries continued
4.
Separate left and right cover.
5.
remove the entire battery assembly from
the cover.
6.
remove (3) Phillips head screws between
the motor and battery bracket.
7.
Pull the motor, PCB, fuse, and inner wire
through the middle of the battery bracket,
separating the battery bracket and single
battery from the motor, PCB, and inner wire.
8.
Cut wires from the PCB and fuse to the
battery bracket.
9.
Keep battery pack together – Do NoT
separate individual batteries. For specific
disposal instructions, please contact your
local authorities for requirements and
regulations on safe disposal or recycling
facilities in your area.
10.
Discard remainder of product
caution:
Disconnecting the battery will
destroy the appliance and void the warranty.
T
roubleshooting
Vacuum won’t turn on
Possible causes
Remedies
1. Battery isn’t fully charged
1. Charge battery. Follow charging battery instructions on page 5
brush roll not turning
Possible causes
Remedies
1. Brush roll is jammed
1. Remove obstruction. Follow instructions on pages 7 and 8
2. Brush roll needs to be reset
2. Follow instructions on page 8
3. Broken brush roll belt
3. Follow instructions on page 8
Vacuum cleaner has low suction
Possible causes
Remedies
1. Dirt container is full
1. Empty dirt container
2. Dirt container is not installed properly
2. Position container correctly and snap firmly into place
3. Foot is loose
3. Make sure foot is fully inserted into body of unit
4. Filters need cleaning
4. Follow filter instructions on page 7
5. Filters need replacing
5. Please call local BISSELL Consumer Services.
