10
BISSELL.com
Maintaining the Brush Roll
Go to
BISSELL.com
for tips on maintaining and replacing your Brush Roll.
1.
Turn the machine OFF and
press the Foot Release Button
to disconnect the Motorised
Floor Cleaning Foot from the
Extension Wand.
2.
Remove the sole plate from
the bottom of the foot by
unscrewing the seven screws
with a Phillips-head screw
driver.
3.
Pull the Brush Roll straight
up and out of the chamber to
remove.
To reinsert, push the Brush
Roll straight down into the
chamber with the flat side of
the Brush Roll against the flat
side of the chamber wall.
Disposing of the Batteries
Go to
BISSELL.com
for additional support and how-to videos.
1.
Run the battery out.
Make sure the machine is
disconnected from the charger
and turned OFF and the hand
vacuum is disconnected from
the extension wand.
2.
Remove five screws from the
back of the machine.
3.
Pull the bottom cover off of
the back of the machine.
4.
Disconnect and remove
entire battery assembly by
unplugging the two sockets
from the vacuum.
5.
Properly discard remainder
of product.
NOTICE
Disconnecting the battery will destroy the appliance and invalidate the warranty.
NOTE:
Keep Battery Pack together – DO NOT separate individual batteries.