6
1.
Plug machine into a
properly grounded outlet.
2.
Turn the machine ON and
OFF by pressing Deep Clean or
Express Clean.
3.
Gently place your foot on
the Foot of the machine and
pull back to recline.
10s
4.
Hold the Solution Spray
Trigger for 10 seconds to
prime the system with cleaning
solution
Note:
When solution
is flowing, bubbles will form
at the edges of the Brush Roll
Nozzle. Holding the trigger
continuously may result in
overwetting your carpet.
5.
Make forward and backward
passes based on your selected
cleaning mode. See “Cleaning
Modes & Instructions” below.
When finished, press Deep
Clean or Express Clean to turn
machine OFF.
Cleaning Carpets & Area Rugs
Tips Before Cleaning
• If cleaning an entire room, consider moving your furniture to another area.
• Remove dirt and debris prior to carpet cleaning.
• Pretreat stains with BISSELL® Pretreat to improve performance on tough, set-in stains.
• Before cleaning area rugs, check the manufacturer’s tag and test an inconspicuous spot on the rug
for colorfastness. Don’t use on silk or delicate rugs.
• Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the
brush may result in premature belt failure.
Cleaning Modes & Instructions
Deep Clean Mode
Delivers a deep clean to your carpet.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release Spray Trigger
• 1 pass forward
• 1 pass back
Express Clean Mode
Provides a lighter clean that dries in about 30
minutes.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release Spray Trigger
• 1 pass forward
• 1 pass back
