background image

11

WARNING 

To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from 

electrical outlet before performing maintenance or troubleshooting.

Problem

Possible Cause

Remedies

Loss of 

suction 

power

Dirty Water Tank has picked 

up maximum amount of dirty 

water and has reached full line.

Empty Dirty Water Tank.

Brush Roll Nozzle is not latched 

in place.

Turn power OFF / Unplug machine and reinstall 

Brush Roll Nozzle.

Tanks may not be seated 

properly.

Turn power OFF / Remove both tanks and 

reseat them so they fit properly on the machine.

Reduced 

spray OR  

no spray

Clean Water Tank is empty.

Refill tank.

Clean Water Tank isn’t seated 

completely.

Turn power OFF / Remove and reseat tank.

System isn’t completely 

primed.

Hold Solution Spray Trigger for 10 to 15 seconds 

to make sure the solution has flowed to the 

spray tips.

Brush Roll Nozzle isn’t latched 

in place.

Turn power OFF / Unplug machine and reinstall 

Brush Roll Nozzle.

Not holding trigger to spray 

solution.

Hold trigger continuously while using the 

machine.

Machine 

shuts OFF 

unexpectedly

Circuit breaker may have 

tripped due to Brush Roll 

blockage.

Unplug machine from outlet. Check to see if 

foreign object is caught in Brush Roll. Remove 

object and make sure Brush Roll spins freely. 

Plug machine back into outlet. Do not step on 

or apply pressure to Brush Roll Nozzle while 

operating machine.

Other maintenance or service not included in the manual should be performed by an authorized service representative.

Troubleshooting

 For additional support, visit

 BISSELLdirect.co.uk

.

Guarantee

BISSELL® International Trading Company BV provides you with a limited five year guarantee when 

you purchase a BISSELL product. This guarantee only applies to products first sold to consumers 

outside of the USA and Canada and is subject to exceptions and limitations set out in our terms and 

conditions at global.BISSELL.com.
This guarantee is a manufacturer’s warranty and is separate and additional to your legal rights which 

may vary from country to country. You can find out more about your legal rights and remedies here 

global.BISSELL.com, or your local consumer advice organisation.
If you would like a hard copy of the terms and conditions of our guarantee, or you would like to make 

a claim under our guarantee, please contact us as follows:
Website: www.BISSELLdirect.co.uk 

Email: [email protected] 

Telephone: 0344-888-6644

Содержание HYDROWAVE 2571E













Отзывы: