w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
M
aintenance and care
8
How to maintain your Vacuum
To maintain maximum cleaning
performance, the following maintenance
steps must be performed:
1.
Clean the dirt tank if any visible
clogs occur.
2.
Empty the dirt cup when the dirt reaches
the “Full” line on the side.
3.
Check the inner and outer circular filters
in the filter cup, as well as the pre-motor
filter at least once per month and clean
or replace as needed.
4.
Check rotating floor brush frequently,
remove any strings, hair or debris that
might interfere with the suction power.
Note: More frequent filter cleaning
or replacement may be necessary
if you are vacuuming new carpet,
fine dust, or have allergy concerns.
Follow the instructions on the
following pages to perform these
simple maintenance steps.
Cleaning the dirt tank
You have three parts to your dirt tank:
upper tank, dirt cup, and filter cup.
Emptying the dirt cup
The dirt cup needs to be emptied when
dirt reaches the “Full” line.
1.
Turn off vacuum and unplug it from
electrical outlet.
2.
Remove dirt cup by sliding the dirt cup
release lever. Then pull dirt cup out.
3.
Empty dirt into garbage container.
4.
Put the dirt cup back in the vacuum
and push in the dirt cup release handle
to lock into place.
Note: There are two clips on
the base of the vacuum that
the cup will fit into to ensure
proper placement.
WarNINg:
To reduce the risk of injury from
moving parts and/or electrical
shock, step power switch to “OFF”
and disconnect polarized plug
from electrical outlet before per-
forming troubleshooting checks
Tip:
The dirt cup may
be washed in
warm water with
a mild detergent.
Remove the lower
tank from the bot-
tom before wash-
ing. Rinse and dry
thoroughly before
re-attaching it.
This is not
dishwasher safe.
2.
3.
4.
Upper Tank
Dirt Cup
Filter Cup
Full Line