background image

w w w. b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

13

T

roubleshooting

Vacuum cleaner won’t run

Possible causes 

remedies

1.  Vacuum cleaner is not plugged in 

1.  Check electrical plug

2.  Blown fuse/tripped breaker 

2.  Check/replace fuse or reset breaker

Vacuum cleaner won’t pick up dirt

Possible causes 

remedies

1.  Dirt cup is full 

1.  Empty dirt cup

2.  Filter dirty 

2.  Check, remove debris or clean

3.  Hose not secure 

3.  Check to be sure hose is snapped into place at both ends

4.  Dirt cup not in place 

4.  Make sure dirt cup is fully inserted and dirt cup  

  

  release handle is pushed in completely

5.  Vacuum path clogged 

5.  Visually check air passageway, hose inlet,  

  

  and hose for anything that might be obstructing.  

  

  the vacuum path. Carefully remove blockage

6.  Rotating power brush drive belt broken 

6.  Replace drive belt

7.  Drive belt stretched 

7.  Check drive belt area and remove obstructions 

  

  Replace drive belt if necessary

8.  Floor brush bristles worn 

8.  Replace floor brush

9.  Floor brush jammed 

9.  Remove floor brush and clean debris from  

  

  brush and ends Check drive belt for any damage

Other maintenance or service not included in the manual should be  

performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please  do  not  return  this  product  to  the  store.             

For any questions or concerns, BISSELL is happy to be of service. 

Contact us directly at 1-800-237-7691.

WarNINg:

To reduce the risk 

of electric shock, turn power OFF and disconnect 

plug from electrical outlet before performing main-

tenance or troubleshooting.

Содержание Easyvac (Powerforce Compact) 23T7 Series

















Отзывы: