7
You can adjust the brush on the underside of the Floor Nozzle to
clean bare floors or carpeted areas.
Move the lever on the Floor Nozzle to
the left ( ) for bare floor vacuuming,
and the brush will adjust to slight
variations in floor height.
Move the lever to the right ( ) and the brush will lock in
position for more effective cleaning of carpeted surfaces.
Your BISSELL Easy Vac is not only a convenient upright bare
floor and carpet cleaner, it's also a versatile floor/above floor
vacuum cleaner when you detach the
lightweight canister.
Detach the Upright Handle by pressing your thumb and
forefinger on the lock buttons on Canister (using a “pinching”
motion) while gently pulling Handle off square end of Canister.
For floor surface cleaning, use the Floor Nozzle,
following the surface adjustment instructions.
For edge cleaning or cleaning small areas, you need only to:
•Detach the Hose from the Hose Port at the bottom/ back
of the Canister. Press the lock button and pull the Hose
from the Port, then insert the Crevice Tool into the end of
the Hose. The Crevice Tool also can be placed in the
round opening of the canister for added versatility.
For quick and easy above floor cleaning:
Detach the Hose from the Hose Port at the bottom/back of
the Canister. Press the lock button and pull the Hose from the
Port, then insert the Crevice Tool into the end of the Hose.
To resume normal floor vacuuming:
Remove Crevice Tool and store in Crevice Tool Clip.
Reconnect Hose to the Hose Port, making certain it is locked
fully in place.
Attach Floor Nozzle and Upright Handle, following
instructions in “How To Put It Together,” page 5.
1.
2.
3.
Tip:
Before cleaning
under low furni-
ture, check for
objects that
might block the
vacuum hose. Do
not pick up hard
or sharp objects
such as glass,
nails, screws,
coins, paper
clips, etc.
Floor Nozzle Adjustment
Upright Floor Cleaning
1.
2.
Cleaning With The Canister
Floor Cleaning
Above Floor Cleaning
1.
1.
3.
2.
Floor Nozzle
Adjustment Lever
