www.BISSELL.com
8
Cleaning Area Rugs
Before each use, hold the Solution Spray
Trigger for 10 seconds to prime the
system with cleaning solution. LED lights
illuminate when holding the trigger.
NOTE:
When solution is flowing, you will
see bubbles forming at the edges of the
Brush roll window.
To clean, hold the
Solution Spray Trigger to
apply solution on both
forward and backward
passes.
To dry area rugs faster,
release the trigger and
clean a second pass
without dispensing
solution.
NOTE:
Before cleaning area rugs, test an inconspicuous area of the rug for
colorfastness. Also, please check manufacturer’s tag before cleaning area rugs for
any specialized cleaning instructions. Not for use on silk or delicate area rugs.
NOTE:
The RUG button dispenses twice the solution of the HARD FLOOR button
to help with area rug cleaning.
4
5
6
ATTENTION
Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs.
Stalling the brush may result in premature belt failure.
Select cleaning mode:
To start cleaning your rugs, turn
the machine ON by pressing the
RUG
button. Once the setting is
selected, the dry vacuum will turn
ON. To turn OFF, press the
RUG
setting a second time.
2
Recline the body of the
machine backward to start
the Brush Roll spinning.
To stop the Brush Roll
spinning, you will need to
stand the machine upright.
3
Plug machine into a
properly grounded
outlet.
1