1.
With a Phillips-head
screwdriver, remove the 4
screws on the back of the
machine. Lift off the back
cover.
2.
Cut the red positive
(+) battery wire with wire
cutters. Wrap the end of the
cut wire with electrical tape.
Individually cut the remaining
battery wires.
3.
Using a Phillips-head
screwdriver, remove the 4
screws located on the sides of
the battery pack and remove it
from the back cover.
4.
Remove the 4 screws from
the battery pack and lift off
the top cover to expose the
control panel and battery cells.
5.
Remove the last two screws
on the control panel.
6.
Pull the control panel back
from the battery pack. With
wire cutters, clip all the metal
poles to disconnect the battery
pack from the control panel.
Keep battery pack together
– DO NOT separate individual
batteries.
Disposing of the Battery
Go to
BISSELL.ca/support
for resources on battery disposal.
Before disposing the battery, make sure:
• The machine is disconnected from the 3-in-1 Docking Station.
• The Clean and Dirty Water Tanks are empty or removed from the machine.
• A Phillips-head screwdriver, electrical tape and rubber handled wire cutters are available for
disassembly.
WARNING
This product contains lithium-ion rechargeable batteries. According to Federal
and State regulations, removal and proper disposal of lithium-ion batteries is required. For removal of the
batteries in your appliance, see instructions on this page. For specific disposal instructions of batteries, please
contact the RBRC (Rechargeable Battery Recycling Corporation) at 1-800-822-8837 or visit www.Call2Recycle.org.
NOTICE
Disconnecting the battery will destroy the appliance and invalidate the warranty.
Troubleshooting
For troubleshooting videos visit
BISSELL.ca/support
.
This guide features everything you need to get ready for first use, including setting up, using and
maintaining your machine, but join us online for a comprehensive walkthrough. Our online support
includes tips and troubleshooting, videos, product registration, parts and more.
BISSELL.ca
11
EN
