Bissell CROSSWAVE CORDLESS MAX 2596 Series Скачать руководство пользователя страница 10

WARNING 

To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from 

electrical outlet before performing maintenance or troubleshooting on the dock.

NOTICE 

To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal 

components may result.

1. 

Place the machine on the 

3-in-1 Docking Station. Ensure 

there is enough solution in the 

Clean Water tank to run the 

Clean Out Cycle. The level of 

the solution should reach the 

Clean Out Cycle line. If the 

level of solution does not reach 

the line, then fill with water to 

that line.

2. 

Push the Clean Out Cycle 

Button to start the 40-second 

cycle. After the cycle is 

complete, empty the Dirty 

Water Tank. See page 9 for 

detailed instructions.

3. 

Remove the Brush Roll so 

it can dry. Grab the front of 

the Brush Roll window and 

pull up to remove. Pull up on 

the Brush Roll tab to remove. 

Put the Brush Roll in the 

drying tray. The Brush Roll and 

window can be hand washed.

4. 

Remove the machine from 

the dock and wipe out the tray. 

Do NOT rinse directly under 

faucet. This keeps water out of 

the charging plug.

5. 

Once the Brush Roll is dry, 

place the end of the roll into 

the right side of the foot of the 

machine. Press the tab of the 

Brush Roll down to lock into 

place.

6. 

Replace the Brush Roll 

Window by lining up the 

window tabs with the edges 

of the foot. Then, press the 

window back into place until 

you hear a “click”.

Using the 3-in-1 Docking Station

 Open the 

BISSELL Connect App

 to watch a full walkthrough video on the dock.

Storing Your Machine

 Download the

 BISSELL Connect App

 for more useful tips on storing and maintaining 

CrossWave Cordless™ Max.

Charging starts once the machine is placed onto the plugged-in dock. Charging stops once the Clean 

Out Cycle runs, then resumes once the cycle completes.

Store CrossWave Cordless™ Max in a protected, dry area. Since this product uses water, it must not 

be stored where there is danger of freezing. Freezing will damage internal components and may void 

the warranty.

10

   BISSELL.ca

EN

Содержание CROSSWAVE CORDLESS MAX 2596 Series

























Отзывы: