www.BISSELL.com
800.237.7691
8
Operations
Transporting cleaner
1.
To move your cleaner from room to room, put
the handle in the upright position, tilt the cleaner
back on its rear wheels and push forward.
2.
The cleaner can also be moved by using the
carrying handle.
Suction Power Indicator
The suction power indicator tells you when the
air flow in your vacuum is reduced due to dirty
filters or a clog in the hose. The suction power
indicator will remain green until the airflow is
reduced. At that time, it begins to change to red.
When it is fully red, the airflow is significantly
reduced by a dirty filter or clog. Follow the steps
on page 12 for clearing a clog. Follow the steps
on pages 9 and 10 to clean your filters. All filters
in the vacuum should be cleaned or replaced
when the clean filter indicator turns red.
NOTE: When your vacuum is turned off, the
suction power indicator will go to the green
color setting. The suction power indicator
only detects reductions in airflow when the
vacuum power is on.
Special tools
Your BISSELL CleanView vacuum is not only a
powerful carpet and rug vacuum cleaner, it’s also
a versatile above floor vacuum cleaner when you
select one of the special tools.
1.
Raise handle to upright position.
2.
Grasp the hose wand and separate from the
hose wand base.
3.
Attach tools by firmly pushing onto vacuum
hose or extension wand.
a. Crevice tool
Use in tight narrow spaces.
b. Dusting Brush
Use brush to dust
furniture, blinds, books, lamps, shelves
and baseboards.
c. Extension wand
Use with desired
attachment for a longer reach.
d. TurboBrush® Tool
Use rotating brush
action for small flat areas such as stairs and
cushions. Press gently down and pull toward
you in a raking motion; too much pressure
will cause the brush to stop rotating.
WARNING
The rotating floor brush continues to rotate while tools
are in use. To reduce the risk of injury from moving parts,
always move the cleaner with the carrying handle at the
back of the cleaner. Always place vacuum cleaner on floor
with handle in upright position when using tools. Never
place your fingers under the cleaner when it is running.
Never place powerfoot on furniture or uneven surfaces. Do
not place vacuum cleaner close enough to objects to pull
them into rotating brush.
» Hair, string and small objects
can block the vacuum
hose or tools. Check them
occasionally for obstructions.
Tip
» The crevice tool is located
inside the wand
Tip
NOTICE
While vacuuming, certain carpets and low humidity
conditions may generate small static discharges. The
discharges are entirely harmless and are not associated
in any way with the main power supply.
c.
b.
a.
d.
