background image

w w w . b i s s e l l . c o m  

7

O

perations

Special on-board tools

Your vacuum is not only a powerful  

carpet and rug cleaner, it’s also a  

versatile above floor vacuum cleaner 

when you select one of the special tools.
1. 

Raise the handle to the upright position.

2. 

Grasp the hose wand handle to separate 

from hose wand base.

3. 

Attach tools by firmly pushing onto vacu-

um hose, hose wand or extension wand. 

Be sure the hose and tool fit snuggly 

together by twisting tightly.

Dusting Brush/Upholstery Tool:

  

Two types of cleaning tools in one attachment. 

• Use brush side to dust furniture, 

blinds, books, lamps, shelves and 

baseboards. 

• Use upholstery side for cushions,  

draperies and fabrics. 

Crevice Tool:

 Use in tight narrow spaces.  

Extension Wand:

 Use with desired attachment 

for a longer reach.

Hose Wand:

 Use with desired attachment 

for a longer reach or for cleaning hard to 

reach places.

TurboBrush™ Pet Tool:

 Use rotating brush 

action for small flat areas such as cushions 

and pet beds. 

NOTE: Press gently down and pull 

towards you in a raking motion. Too 

much pressure will cause the brush 

to stop rotating.

CAUTION:

  

The rotating floor brush continues 

to rotate while tools are in use. To 

reduce the risk of injury from mov-

ing parts, always move the cleaner 

with the carrying handle. Always 

place vacuum cleaner on the floor 

with handle in upright position 

when using tools. Never place your 

fingers under the cleaner when it is 

running. Never place powerfoot on 

furniture or uneven surfaces. Do not 

place vacuum cleaner close enough 

to objects to pull them into rotating 

brush.

Tip:

Before cleaning 

under low furniture, 

check area first for 

objects that might 

harm the unit or 

block the vacuum 

hose.

Dusting Brush/ 

Upholstery Tool

Extension Wand

Crevice Tool

Hose Wand  

Base

Hose Wand

TurboBrush™ 

Pet Tool

Содержание Cleanview Pet Ultimate 22T2 Series

















Отзывы: