8
BISSELL.com
Cleaning & Replacing the Filters
Go to
support.BISSELL.com
for tips on maintaining and replacing your vacuum filter.
WARNING
Before using your vacuum, make sure that the Dirt Tank is in locked position and that the filter is in
place. DO NOT operate your vacuum without the filter.
Pre-Motor Filter
1.
For best cleaning
performance, always clean
your filter after each use. Turn
machine OFF. Remove Dirt Tank
by pressing the Tank Release
Button and sliding the tank out.
2.
Twist top to remove filter
frame from the separator.
Remove the filter from the
filter frame housing. Tap the
filter against the side of a trash
bin to remove dust and debris.
3.
Rinse under warm water
and squeeze to remove dirt.
Lay out for 24 hours until
completely dry. Reinsert filter
into the frame with the tag side
touching the frame.
Post-Motor Filter
4.
To clean the post-motor filter
located on the back of the hand
vac, turn OFF machine. Pinch
the latch on the filter cover to
remove.
5.
Press up on the bottom tab
to pull filter out.
6.
If there’s debris on the filter,
tap it on a trash bin and rinse
under warm water. Let dry for
at least 24 hours before putting
it back in the vacuum and
replacing the filter cover.
Содержание CLEANVIEW PET SLIM 2903 Series
Страница 11: ......
