w w w . b i s s e l l c o m m e r c i a l . c o m 8 5 5 . 5 4 4 . 7 3 3 6
Carry
Handle
Upholstery
Tool
Telescoping
Wand
Cord
A
ssembly
5
9.
6.
1.
attach the upper body of the vacuum to
the base (foot) of the vacuum by inserting
it vertically until you hear it “click.”
2.
slide handle into the slot on top of main
body of vacuum.
3
locate the cord lock and place over
screw hole as shown. secure with thumb-
screw provided.
4.
adjust the height of the handle by
pulling up or down on the yellow handle
near base of handle. Push all the way
down to lock the handle at a certain
height.
5.
install the hose by pushing one end into
the top of the housing. secure by plac-
ing clip around the base.
6.
Push opposite end into the wand and
secure with second clip.
7.
Place the open end of wand over the
opening of the power brush housing and
push the wand into the sleeve in the back
of the bag housing until you hear it click.
8.
open the cable cover door next to on/
off switch at top of unit. insert the plug.
9.
attach a small section of the upper cord
into the cord lock
10.
store attachments on the back of the unit
in the yellow clasps.
ATTENTION:
some berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggra-
vate this condition.
5.
3.
4.
