w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
M
aintenance and care
14
brush reset
if something becomes lodged in the foot
and the brush shuts off, turn the cleaner
off and unplug from the outlet. Remove
the obstruction. the brush will automati-
cally reset when the cleaner is plugged
in and turned back on.
if the vacuum does not re-start then
turn the cleaner off and unplug from
outlet. Wait 30 minutes while the motor
cools. the thermal protector automati-
cally resets and cleaning may continue.
brush maintenance
the rotating brush should be checked
regularly for accumulating debris that
might reduce the cleaning performance
of your vacuum.
1.
Unplug cleaner from electrical outlet.
2.
Recline the handle and turn your cleaner
over so the bottom side is up.
3.
Carefully cut away any visible hair, fibers
or debris from the brush roll.
do not attempt to disassemble the
vacuum foot or to remove the brush
roll. if you feel it needs to be checked or
replaced, call bissell consumer services
or visit the website to locate an
authorized service center.
belt maintenance
the brush belt is designed to last the
useful life of the cleaner when used
according to all instructions in the
user guide under normal household
conditions. if you feel that it needs to
be checked or replaced, call bissell
consumer services or visit the website to
locate an authorized service center. do
not attempt to disassemble the vacuum
foot to change the belt.
caution:
To reduce the risk of injury
from moving parts, turn off
the vacuum cleaner and
disconnect power plug from
electrical outlet.
3.
