T
roubleshooting
Vacuum cleaner won’t turn
Possible causes
Remedies
1.
Power cord not firmly plugged in
1.
Check electrical plug
2.
Blown fuse/tripped breaker
2.
Check/replace fuse or reset breaker.
Vacuum cleaner won't pick up dirt
Possible causes
Remedies
1.
Incorrect height adjustment
1.
Adjust powerfoot to correct height setting
2.
Hose not attached to suction opening
2.
Grasp quick release handle and firmly push
hose wand onto the suction opening.
3.
Twist 'n Snap hose not securely attached
3.
Make sure Twist 'n Snap hose is snapped
into locked position
4.
Crack or hole in hose
4.
Check hose and replace if needed
5.
Broken or worn drive belt
5.
Replace drive belt, see page 11
6.
Rotating floor brush bristles worn
6.
Replace
brush
7.
Rotating floor brush jammed
7.
Remove brush and clean debris from
brush ends
8.
Clog in vacuum
8.
Follow instructions for clearing
clogs on page 12
9.
Dirt container full
9.
Empty dirt container
10.
Dirt container not installed properly
10.
Position correctly and lock in place
11.
Filters are dirty
11.
Check and clean inner and outer circular
filters, pre-motor and post-motor filters
12.
Louvers missing or installed incorrectly
12.
Check for a clog in the tube in the center of the
dirt container, clear and properly install louvers
Tools won't pick up dirt
Possible causes
Remedies
1.
Crack or hole in hose
1.
Check hose and replace if needed
2.
Vacuum hose, wand or tools clogged
2.
Follow instructions for cleaning clogs on
page 12
3.
Dirt container full
3.
Empty dirt container
4.
Dirt container or upper tank not installed properly
4.
Position correctly and lock in place
5.
Filters are dirty
5.
Check and clean inner and outer circular
filters, pre-motor and post-motor filters
6.
Louvers missing or installed incorrectly
6.
Check for a clog in the tube in the center of the
dirt container, clear and properly install louvers
Vacuum cleaner difficult to push
Possible causes
Remedies
1.
Incorrect height adjustment
1.
Adjust powerfoot to correct height setting
2.
Rotating floor brush not rotating
2.
Check drive belt and brush
WARNING:
To reduce the risk of electric shock, turn
power OFF and disconnect polarized plug
from electrical outlet before performing
maintenance or troubleshooting.
13
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
ug310-5825_6579_107.indd 13
ug310-5825_6579_107.indd 13
1/18/07 1:29:37 PM
1/18/07 1:29:37 PM
