background image

To maintain maximum cleaning performance, the following 
maintenance steps must be performed:

Empty the Dirt Container when the dirt reaches the “Full”
line on the side.

Check the Upper Tank and Pre-Motor Filters monthly and
clean and replace as needed.

Replace the HEPA Media Post-Motor Filter every 
six months.

NOTE: More frequent filter cleaning may be 
necessary if you are vacuuming new carpet, fine
dust, or have allergy concerns.
Follow the instructions on the following pages to
perform these simple maintenance steps.

The Dirt Container needs to be emptied when the dirt reaches the
“Full” line on the side of the Container.

Unplug cleaner from electrical outlet.

Slide the Lock ‘n Seal Lever to the “Unlock” position.

Grasp handle and pull the Dirt Container straight out to
remove from vacuum.

Empty dirt into garbage container.

Put the Dirt Container back in the vacuum and slide the
lever to the “Lock” position.

Note: The Dirt Container may be washed in 
warm water with a mild detergent. Make 
sure it is completely dry before using again.

How to Maintain Your BISSELL Lift-Off 

Tip:

For maximum 
cleaning performance,
check and clean or
replace all filters 
as suggested.

3.

Empty Dirt Container

1.

2.

3.

4.

5.

1.

2.

WARNING: 

To

reduce the risk of electric
shock, turn Power Switch 
OFF and disconnect 
polarized plug from 
electrical outlet before 
performing maintenance or
troubleshooting checks.

Full Line

Lock Position

Unlock
Position

Содержание 3750/6595

















Отзывы: