The Powerfoot on your BISSELL Lift-Off can be adjusted to clean
several floor surfaces.
NOTE: For optimal cleaning performance, adjust to
the lowest practical setting. If your cleaner is
difficult to push, adjust to the next higher setting.
Place Handle in Upright Position.
Turn Height Adjustment Knob to desired setting.
Lowest Setting
–
For bare floors.
Medium Settings –
For short and medium pile carpets.
Highest Setting –
For plush pile carpet.
NOTE: You may also adjust the setting while in
the Normal Cleaning Position.
Your BISSELL Lift-Off is not only a powerful floor vacuum cleaner,
it’s also a versatile stairs and above floor vacuum when you select
one of the special tools.
Note: The tools can be used with the vacuum in the
Upright Position or with the Detachable Canister.
Detach the Vacuum Hose by grasping the Hose Grip and
lifting to separate from the Hose Grip Base.
Attach tools by firmly pushing onto Vacuum Hose or
Telescoping Extension Wand.
Combination Dusting Brush/Upholstery Tool:
Two types of cleaning tools are included in one attach-
ment: rotate for desired tool.
■
Use Brush side to dust furniture, blinds, books,
lamps, shelves, and baseboards.
■
Use Upholstery side for curtains, draperies, cush-
ions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Stair Cleaning Tool:
Use for stairs, area rugs, and other small carpeted
areas. This tool can also be used for
bare floors
.
Telescoping Extension Wand:
Use with desired attachment for a longer reach.
To extend the Wand, twist the collar to “Unlock”
position and push away from you. Twist the collar to
the “Lock” position to lock into place. To retract,
twist to unlock, pull toward you and twist to relock.
All items may not be included with your model. More
tools are available; to order please refer to page 15.
Special Tools
Tip:
Before cleaning
under low
furniture, check
area first for
objects that
might harm the
unit or block the
Vacuum Hose.
Power Height Adjustment
2.
1.
2.
CAUTION:
Always place vacuum cleaner
on floor in its fully Upright
Position and make sure it is
locked into place before
removing Canister or when
using tools. Placing the Lift
Off in its full Upright Position
automatically stops the
rotating brush.
1.
