Item Part No. Part Name
1
210-9103
Crevice Tool
2
3215P
Drive Belt (2-Pack)
3
32013
Style 2 Microfiltration Dust Bag (3-Pack)
4
3218P
Style 2 Dust Bag (3-Pack)
5
210-9104
Upholstery Tool/Dusting Brush
6
210-9102
Extension Wand
7
210-5005
6’ Flex Hose
8
555-9069
Headlight Bulb
If suggestions for this or any function of your Upright
Vacuum Cleaner do not correct the problem, call:
BISSELL Customer Service
1-800-263-2535
Monday - Friday
8:00 A.M. - 4:30 P.M. (E.S.T.)
9
Replacement parts - BISSELL
®
Upright Vacuum System
1
5
6
7
2
3/4
Troubleshooting
Vacuum cleaner won’t run.
Possible Causes
Remedies
Vacuum cleaner is not plugged in
Check electrical plug
Household fuse/breaker
Check/replace fuse - Reset breaker
Call BISSELL Customer Service
Vacuum cleaner won’t pick up dirt.
Possible Causes
Remedies
Incorrect setting
Move Cleaning Selector to Floor setting
Height adjustment too high
Reset Height Adjustment
Paper Dust Bag is full
Replace with new bag
Rotating brush drive belt broken
Replace Drive Belt
Drive Belt stretched/
Reposition belt/clean brush/belt areas
off Motor Pulley Shaft
Rotating Floor Brush bristles worn
Replace brush
Rotating Floor Brush jammed
Remove brush and clean debris from
brush ends
Air Passageway clogged
Remove Brush Cover.
Clean debris from passageway
Dirt Tube is clogged
Remove bolt and nut from Vacuum Body.
Use flat blade screwdriver to release
locking tab on Powerfoot from Vacuum
Body. Remove Vacuum Body and clean
obstructions from inside Powerfoot and
Vacuum Body bottom. Reassemble
following instructions on Page 4
Cleaning Selector won’t slide.
Possible Causes
Remedies
Dirt clogging slide track
Remove Brush Cover and clean slide area
Tools won’t pick up dirt.
Possible Causes
Remedies
Incorrect Setting
Move Cleaning Selector to Tools setting
Vacuum Hose, Wands
Visually check for objects blocking
or Tools clogged
suction path and remove carefully
Vacuum cleaner is difficult to push.
Possible Causes
Remedies
Incorrect Floor Surface Selector setting Move Selector to next highest setting
WARNING:
To
reduce the risk of injury
from moving parts and/
or electrical shock, turn
Power Switch OFF and
disconnect polarized plug
from electrical outlet
b e f o r e p e r f o r m i n g
troubleshooting checks.
8
