7
brush roll belt replacement:
if the brush roll belt should break, call
1.800.811.183 (for Australia inquiries),
0.800.247.735 (for New Zealand inquiries),
or visit www.bissell.com to purchase
replacement belt number 2031608.
Replacement instructions:
1.
Turn power OFF (O). Remove foot
assembly from unit and turn over to
access the brush roll belt.
2.
Remove three Phillips head screws to
remove the belt cover.
3.
locate broken belt.
4.
Replace belt.
5.
Place brush roll back into foot of unit.
6.
Replace the belt cover and secure with
three screws.
7.
Attach foot assembly on unit.
d4 disposal of batteries
if your lift-Off Floors & More is to be
disposed of, the batteries should be
removed and disposed of properly.
1.
IMPORTANT
: Unplug Charger.
2.
Remove hand vac from unit and remove
dirt cup from handle.
3.
Remove (5) Phillips head screws on the
handle and cover.
4.
separate left and right cover.
5.
Remove the entire battery assembly from
the cover.
6.
Remove (3) Phillips head screws between
the motor and battery bracket.
7.
Pull the motor, PCb, fuse, and inner wire
through the middle of the battery bracket,
separating the battery bracket and single
battery from the motor, PCb, and inner wire.
8.
Cut wires from the PCb and fuse to the
battery bracket.
9.
Keep battery packs together – DO NOT
separate individual batteries. For proper
battery disposal instructions, please contact
your local authorities for requirements and
regulations on safe disposal or recycling
facilities in your area.
10.
Discard remainder of product
cAuTION: disconnecting the battery
will destroy the appliance and invalidate
the warranty.
7
www.bissell.com
