www.BISSELL.com.au
11
Problem
Possible causes
Remedies
Vacuum
cleaner
won’t run
Power cord not plugged in
Check electrical plug
Blown fuse/tripped breaker Check/replace fuse or reset breaker
Vacuum
cleaner won’t
pick up dirt
Dirt container is full
Empty dirt container
Filter dirty
Check, remove debris or clean
Hose not secure
Check to be sure hose is snapped into place at
both ends
Dirt container not in place
Make sure dirt container is completely inserted
and snapped into place.
Vacuum path clogged
Visually check air passageway, hose inlet, and
hose for anything that might be obstructing the
vacuum path. Carefully remove blockage.
Rotating power brush drive
belt broken
Replace drive belt
Drive belt stretched
Check drive belt area and remove obstructions.
Replace drive belt if necessary
Floor brush bristles worn
Replace floor brush
Floor brush jammed
Remove floor brush and clean debris from brush
and ends. Check drive belt for any damage
Cord will not
retract
Power cord is knotted or
twisted
Follow instructions on page 6
Troubleshooting
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
