www.BISSELL.com.au
11
Troubleshooting
Problem
Possible causes
Remedies
Reduced
spray OR
no spray
in upright
mode
Formula Tank empty
Refill tank with water and formula.
Lint screen on Formula Tank
cap clogged
Soak Formula Tank cap in warm
water and then rinse under running
water.
Upper body not attached prop-
erly.
Repeat steps 1-4 on page 5.
Reduced
spray or
no spray
attachment
Formula Tank empty
Refill tank with water and formula.
Spray nozzle clogged
Clean spray nozzle by rinsing tool
under water.
Pump needs priming
Place tool on floor and press spray
trigger.
Machine is reclined
Return machine to full upright
position until it locks into place.
ReadyTools dial is set to “FLOOR
CLEANING”
Choose “TOOLS” setting on
ReadyTools dial.
Machine
not picking
up cleaning
formula
Dirty Water Tank not aligned/
secured
Check tank alignment and secure
with side latches.
Dirty Water Tank full
Empty tank.
Removable nozzle installed
improperly
Unplug unit. Align four "hooks" into
bottom first, then snap into place
on top.
Removable nozzle full of debris
Unplug unit. Remove nozzle and
rinse under running water.
Red lint screen under Dirty Water
Tank clogged
Remove debris from lint screen.
ReadyTools dial not set properly
Choose either “FLOOR CLEANING”
or “TOOLS” for desired cleaning
method.
Brush not
turning
Handle not reclined.
Press the red recline lever on the
back of the unit to activate the
brush. Follow step 4 under "Carpet
Cleaning" on page 7.
WARNING
To reduce the risk of electric shock, push power button
OFF and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
