OPERATIONS
FLOOR SETTINGS
PRESET:
CARPET/CREVICE
In floor-cleaning mode, the CARPET preset
can be pressed = Max. suction power + Brush
roll ON. Use this setting on carpeted floors.
In removed and parked mode, the CREVICE
preset can be pressed = Max. suction power.
Use this setting when using the crevice tool at
the end of the hose.
PRESET:
FLOOR/STAIRS
In floor-cleaning mode, the FLOOR preset can be
pressed = Max. suction power + Brush roll OFF.
Use this setting on hard floor surfaces.
In removed and parked mode, the STAIRS preset can
be pressed = Med. suction power. Use this setting
when using the stair tool on the end of the hose.
PRESET:
RUGS/DRAPES
In floor-cleaning mode, the RUGS preset can
be pressed = Low suction power + Brush roll
OFF. Use this setting on loose rugs.
In removed and parked mode, the DRAPES
preset can be pressed = Min. suction. Use this
setting when using tools to clean drapes and
other delicate fabrics.
4
OPERATIONS
POWER INDICATORS
POWER INDICATOR
Blue LED indicates that AC plug is
plugged in and live. No illumination
indicates that AC is not connected.
SUCTION ADJUSTMENT
BRUSH ROLL ON/OFF
Press this button to turn brush roll
ON/OFF.
MAXIMUM SUCTION
Press this button to select max.
suction power.
MEDIUM SUCTION
Press this button to select med.
suction power.
LOW SUCTION
Press this button to select low
suction power.
POWER SOCKET
Allows connection to main AC
power supply.
STORAGE/STANDBY SWITCH
Storage mode is complete power off. For charging
the battery and putting into standby mode, slide
switch to standby position.
BATTERY INDICATOR
Displays the capacity level of the battery
when the unit is in standby and while the
product is in use. If a fault condition has
occurred, the fault can be identified by
counting the number of LEDs illuminated and
referencing the fault indication information.
BATTERY CHECK BUTTON
Push this button to show battery capacity.
If a fault has occurred. press this to identify
the fault condition.
POWER BUTTON
Pushing this button turns the vacuum cleaner
ON/OFF (unit must be in standby mode).
5
