L
E
F
Fig. 6
P.T.O.
It is a front locking 3-teeth implement. It rotates right, independently from gear, and depending
on the motor speed (990 rev/1
’
at 3600rev/1
’
of the motor).
For the scheme and the flange dimensions, please refer to figure 10.
CHECKS BEFORE STARTINE THE MACHINE
Check oil level, following the instructions in the engine operating manual. To ensure correct
lubrication, especially when working on slopes, the oil level should be at maximum. Should the
oil spill off, use the quality and density as prescribed in the same operating manual.
Check oil level in the gearbox through oil plug A (fig.7), verify that the level is between the two
grooves B and C.
A
B
C
Fig. 7
If necessary, add oil AGIP ROTRA MP SAE 80W/90(rif.US.A.MIL.-L-2105C) (for high pressures).
Fill tank with fuel using a funnel with a mesh filter to eliminate impurities. Never fill the tank
whilst engine is running.
After having performed these operations, the machine is ready to be started.
www
www.italias
.italiastar
tar.r
.ro
o
in
inffo@italiastar
.ro
o
004/
004/021.433.
021.433.03.27
03.27
Italia Star Com Due S.R.L.
Italia Star Com Due S.R.L.
108
