Bisonte BTA-MT430Y, Руководство пользователя

Страница: 55 / 60

lossing.
5
、
Adjustment of the depth
There are three grooves in the connect plate, the wheels put in the
highest groove when working. When not working,the wheels need putting
in the middle or the bottom grooves(according to the tall of worker).
Ⅴ 、
OPERATION
1
、
Adding oil
Mixing rate betweeen 90# gasoline and two-stroke oil is 25:1
Take care: Forbid to use pure gasolire or the mixture oil rate at the
①
above of 25:1 as fuel
；
Adding fuel must be done under the instruction of the
②
fireproofing
2
、
Start up
Press the button of carburetor 5
⑴
-6 times , until pour fuel from
tube , then close the choker
；
Note: if engine is warm or the high temputer , you should put the
choker on the full position.
Open the accelerograph 1/3~1/2
⑵ ；
Pull the starter smoothly , after starting the engine ,
⑶
open choker fully.
Note: Make sure there is nothing lo
①
ck the gear wheels
before starting
；
When the gear wheels are running , make sure the gear
②
wheels do not come up against anything or anybody.
3
、
Assignment
Strictly control the speed of the rotating plough. The
speed should be at 0.5m/sec when the rotate speed arrive
at 8000~9000/min.
In order to keep the good quality of rotating
plough .While working should be avoided any danger .
4
、
Stopping
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
55